Home · For Textile Mills · Wastewater Coagulant Programme
Textile · Dye-house effluent · PAC + CPAM · Colour + COD removal

Textile-wastewater coagulant + flocculant program

Programme outline, dosing range, feed points, target parameters, and lead times for the AAS wastewater coagulant programme into the textile mills segment in Pakistan. Sole Pakistan agent for Shaanxi Ande Technology (China) and Innovative Water Technology (Pakistan). Karachi office, same-business-day technical response.

Same-day Karachi visit · CoA per drum · Engineering autopsy on request

Field note Textile Mills · Wastewater Coagulant Programme

Pakistani textile-effluent regulation is tightening on colour and COD discharge. AAS programs are sized to land NEQS with margin, not at-the-limit.

Programme spec

Dosing programme outline

Programme outline below is the AAS default for textile mills applications. Final dose is set against the customer's source-water analysis, equipment metallurgy, and operating cycles. Every drum ships with a Certificate of Analysis; SDS is shipped pre-shipment for HSE-document review.

Coagulant
PAC liquid (≥10% Al₂O₃), high-basicity
Coagulant dose
300–800 ppm depending on dye load
Flocculant
Anionic / cationic PAM 0.5–3 ppm (paired against substrate charge)
pH trim
6.5–7.5 ahead of coagulation
Target colour removal
75–90% at headline wavelengths
Target COD removal
60–80% across primary
Suspended solids out
≤ 50 mg/L
Sludge handling
CPAM at the belt-press; 18–22% cake DS achievable
Lead time
Ex-Karachi stock on PAC and CPAM
Why this matters in textile mills

Why textile-effluent chemistry has to be tuned to the dye class

Reactive dye-house effluent (cotton processing — the bulk of Faisalabad and Karachi textile output) carries high colour at 465 / 525 / 620 nm, hydrolysed reactives, and salt. Disperse-dye effluent (polyester) carries different loads. PAC outperforms alum across both — wider pH window, denser floc — but the right CPAM / PAM downstream is dye-class-specific. AAS runs the jar test at the customer plant and lands the dose programme against the actual effluent, not a generic specification.

Procurement & engineering enquiry

Request a technical proposal for wastewater coagulant programme.

Send the unit you're trying to protect (site, loop or train, symptom or KPI, volume, deadline) plus a source-water analysis if you have one. Same-business-day Karachi reply with a programme outline, dose range, and the relevant CoAs / SDS attached.

Karachi office · Sole Pakistan agent · Shaanxi Ande & Innovative Water

Request proposal WhatsApp